Din Spec. : Circlips For Shafts - DIN 6799

*All measurements in millimeters (mm)
| d1 | d2 max. | s | Tol. | d3 | d4 | m | Tol. | n min. | |
|---|---|---|---|---|---|---|---|---|---|
| from | to | Tol. h11 | |||||||
| 0.8 | 2.25 | 0.2 | ±0.02 | 1 | 1.4 | 0.8 | 0.24 | +0.04 0 |
0.4 |
| 1.2 | 3.25 | 0.3 | 1.4 | 2 | 1.2 | 0.34 | 0.6 | ||
| 1.5 | 4.25 | 0.4 | 2 | 2.5 | 1.5 | 0.44 | 0.8 | ||
| 1.9 | 4.8 | 0.5 | 2.5 | 3 | 1.9 | 0.54 | +0.05 0 |
1 | |
| 2.3 | 6.3 | 0.6 | 3 | 4 | 2.3 | 0.64 | 1 | ||
| 3.2 | 7.3 | 0.6 | 4 | 5 | 3.2 | 0.64 | 1 | ||
| 4 | 9.3 | 0.7 | 5 | 7 | 4 | 0.74 | 1.2 | ||
| 5 | 11.3 | 0.7 | 6 | 8 | 5 | 0.74 | 1.2 | ||
| 6 | 12.3 | 0.7 | 7 | 9 | 6 | 0.74 | 1.2 | ||
| 7 | 14.3 | 0.9 | ±0.03 | 8 | 11 | 7 | 0.94 | 1.5 | |
| 8 | 16.3 | 1 | 9 | 12 | 8 | 1.05 | +0.08 0 |
1.8 | |
| 9 | 18.8 | 1.1 | 10 | 14 | 9 | 1.15 | 2 | ||
| 10 | 20.4 | 1.2 | 11 | 15 | 10 | 1.25 | 2 | ||
| 12 | 23.4 | 1.3 | 13 | 18 | 12 | 1.35 | 2.5 | ||
| 15 | 29.4 | 1.5 | 16 | 24 | 15 | 1.55 | 3 | ||
| 19 | 37.6 | 1.75 | 20 | 31 | 19 | 1.8 | 3.5 | ||
| 24 | 44.6 | 2 | 25 | 38 | 24 | 2.05 | 4 | ||
| 30 | 52.6 | 2.5 | 32 | 42 | 30 | 2.55 | 4.5 | ||
*All information is strictly informative
Bolts Din Specifications
- Round Head Rivets - DIN 660
- Countersunk Head Rivets - DIN 661
- Tee-Head Bolts With Double Nip - DIN 188
- Tee-Head Bolts With Square Head - DIN 186 A
- External Retaining Rings - DIN 471
- Internal Retaining Rings - DIN 472
- Foundation Bolts with Hexagon Nuts-DIN 529 E
- Mu-Carriage Bolts With Hexagon Nuts-DIN 603
- Flat Countersunk Nip Bolt w/Hex Nut-DIN 604
- Hex fitting Bolts w/short Threaded Portion - DIN 610
- Hexagon Socket Screw Plugs - DIN 908
- Hexagon Head Screw Plugs - DIN 910
- Hexagon Socket Pipe Plugs - DIN 906
- Socket Set Screws With Flat Point - DIN 913
- Hexagon Cap Screws Partially Threaded
- DIN 931 - Hexagon Cap Screws With Slot - DIN 933 Sz
- Hexagon Cap Screws Fully Threaded - DIN 933
- Self Locking Domed Cap Nuts With Nylon Insert - DIN 986
- Grooved Pins Full Length Paralled Grooved - DIN 1473
- Grooved Pins Third Length Center Grooved - DIN 1475
- Round Head Grooved Pins - DIN 1476
- Flat Countersunk Head Grooved Pins
- DIN 1477 - Turnbuckles - DIN 1480
- Spring Ppins, Heavy Duty - DIN 1481
- Parallel Pins Hardened - DIN 6325
- Circlips For Shafts - DIN 6799
- Coiled Pins, Medium Duty - DIN 7343
- Taper Pins With Internal Thread - DIN 7978 A
- Dowel Pins With Internal Thread - DIN 7979 D
- Hex Bolts For High Strength Struct. Bolting - DIN 6914
- Hexagon Socket Screw Keys With Pilot
- DIN 6911 - Self-Locking Hex Flange Nuts: Non Metallic Insert - DIN 6926
- Parallel Keys, Round Ended - DIN 6885 A
- Parallel Keys, Square Ended - DIN 6885 B
- Slotted Pan Head Screws, Small Head
- DIN 920 - Slotted Set Screws With Cone Point - DIN 553

English
German
spanish

