Din Specifications : Flat Washer With Chamfer - DIN 126 B

*All measurements in millimeters (mm)
| d1 | used for | d2 | s |
|---|---|---|---|
| 5.5 | M5 | 10 | 1 |
| 6.6 | M6 | 12 | 1.6 |
| 7.6 | M7 | 14 | 1.6 |
| 9 | M8 | 16 | 1.6 |
| 11 | M10 | 20 | 2 |
| 13.5 | M12 | 24 | 2.5 |
| 15.5 | M14 | 28 | 2.5 |
| 17.5 | M16 | 30 | 3 |
| 22 | M20 | 37 | 3 |
| 26 | M24 | 44 | 4 |
| 30 | M27 | 50 | 4 |
| 33 | M30 | 56 | 4 |
| 36 | M33 | 60 | 5 |
| 39 | M36 | 66 | 5 |
| 42 | M39 | 72 | 6 |
| 45 | M42 | 78 | 7 |
| 48 | M45 | 85 | 7 |
| 52 | M48 | 92 | 8 |
| 56 | M52 | 98 | 8 |
| 62 | M56 | 105 | 9 |
| 66 | M60 | 110 | 9 |
| 70 | M64 | 115 | 9 |
*All information is strictly informative
- Tab Washers With Long Tab - DIN 93
- Flat Washer Without Chamfer - DIN 125 A
- Flat Washer With Chamfer - DIN 125 B
- Flat Washer Without Chamfer - DIN 126
- Spring Washer, Curved - DIN 137 A
- Spring Washer, Waved - DIN 137 B
- Split Lock Washer With Bend Ends - DIN 127 A
- Split Lock Washer With Flat Ends - DIN 127 B
- Split Spring Washers, Curved - DIN 128 A
- Split Spring Washers, Waved - DIN 128 B
- External Tab Washer - DIN 432
- Square Bevel Washer: 8% - DIN 434
- Square Bevel Washer: 14% - DIN 435
- Square Washer - DIN 436
- Tab Washers With Long And Short Tab - DIN 463
- Internal Tab Washers - DIN 462
- Sealing Washers - DIN 470
- Flat Washer With Reduced O.D. - DIN 433
- Shim Washers - DIN 988
- Internal/External Tooth Lock Washers - DIN 6797 A+J
- A+J- Serrated Lock Washers - DIN 6798
- IZ - Serrated Lock Washers (Type JZ) - DIN 6798
- Hi-Collar Lock Washers - DIN 7980
- V - 90degree Countersunk Serrated Lock Washers - DIN 6798
- Conical Spring Washers Belleville Type - DIN 6796
- AZV - Serrated Lock Washers (type AZV) - DIN 6798

English
German
spanish

