Din Spec. : Hexagon Socket Screw Keys With Pilot - DIN 6911

*All measurements in millimeters (mm)
| WAF Tol. h11 | L1 | L2 | For DIN 6912 |
|---|---|---|---|
| 3 | 63 | 20 | M4 |
| 4 | 71 | 25 | M5 |
| 5 | 80 | 28 | M6 |
| 6 | 90 | 32 | M8 |
| 8 | 100 | 36 | M10 |
| 10 | 112 | 40 | M12 |
| 12 | 125 | 45 | M14 |
| 14 | 140 | 55 | M16/18 |
| 17 | 160 | 60 | M20/22 |
*All information is strictly informative
Bolts Din Specifications
- Round Head Rivets - DIN 660
- Countersunk Head Rivets - DIN 661
- Tee-Head Bolts With Double Nip - DIN 188
- Tee-Head Bolts With Square Head - DIN 186 A
- External Retaining Rings - DIN 471
- Internal Retaining Rings - DIN 472
- Foundation Bolts with Hexagon Nuts-DIN 529 E
- Mu-Carriage Bolts With Hexagon Nuts-DIN 603
- Flat Countersunk Nip Bolt w/Hex Nut-DIN 604
- Hex fitting Bolts w/short Threaded Portion - DIN 610
- Hexagon Socket Screw Plugs - DIN 908
- Hexagon Head Screw Plugs - DIN 910
- Hexagon Socket Pipe Plugs - DIN 906
- Socket Set Screws With Flat Point - DIN 913
- Hexagon Cap Screws Partially Threaded
- DIN 931 - Hexagon Cap Screws With Slot - DIN 933 Sz
- Hexagon Cap Screws Fully Threaded - DIN 933
- Self Locking Domed Cap Nuts With Nylon Insert - DIN 986
- Grooved Pins Full Length Paralled Grooved - DIN 1473
- Grooved Pins Third Length Center Grooved - DIN 1475
- Round Head Grooved Pins - DIN 1476
- Flat Countersunk Head Grooved Pins
- DIN 1477 - Turnbuckles - DIN 1480
- Spring Ppins, Heavy Duty - DIN 1481
- Parallel Pins Hardened - DIN 6325
- Circlips For Shafts - DIN 6799
- Coiled Pins, Medium Duty - DIN 7343
- Taper Pins With Internal Thread - DIN 7978 A
- Dowel Pins With Internal Thread - DIN 7979 D
- Hex Bolts For High Strength Struct. Bolting - DIN 6914
- Hexagon Socket Screw Keys With Pilot
- DIN 6911 - Self-Locking Hex Flange Nuts: Non Metallic Insert - DIN 6926
- Parallel Keys, Round Ended - DIN 6885 A
- Parallel Keys, Square Ended - DIN 6885 B
- Slotted Pan Head Screws, Small Head
- DIN 920 - Slotted Set Screws With Cone Point - DIN 553

English
German
spanish

