Hi-Collar Lock Washers - DIN 7980
*All measurements in millimeters (mm)
| d1 | used for | s | d2 |
|---|---|---|---|
| 3.1 | M3 | 1 | 5.6 |
| 4.1 | M4 | 1.2 | 7 |
| 5.1 | M5 | 1.6 | 8.8 |
| 6.1 | M6 | 1.6 | 9.9 |
| 8.1 | M8 | 2 | 12.7 |
| 10.2 | M10 | 2.5 | 16 |
| 12.2 | M12 | 2.5 | 18 |
| 14.2 | M14 | 3 | 21.1 |
| 16.2 | M16 | 3.5 | 24.4 |
| 18.2 | M18 | 3.5 | 26.4 |
| 20.2 | M20 | 4.5 | 30.6 |
| 22.5 | M22 | 4.5 | 32.9 |
| 24.5 | M24 | 5 | 35.9 |
| 27.5 | M27 | 5 | 38.9 |
| 30.5 | M30 | 6 | 44.1 |
| 33.5 | M33 | 6 | 47.1 |
| 36.5 | M36 | 7 | 52.2 |
*All information is strictly informative
- Tab Washers With Long Tab - DIN 93
- Flat Washer Without Chamfer - DIN 125 A
- Flat Washer With Chamfer - DIN 125 B
- Flat Washer Without Chamfer - DIN 126
- Spring Washer, Curved - DIN 137 A
- Spring Washer, Waved - DIN 137 B
- Split Lock Washer With Bend Ends - DIN 127 A
- Split Lock Washer With Flat Ends - DIN 127 B
- Split Spring Washers, Curved - DIN 128 A
- Split Spring Washers, Waved - DIN 128 B
- External Tab Washer - DIN 432
- Square Bevel Washer: 8% - DIN 434
- Square Bevel Washer: 14% - DIN 435
- Square Washer - DIN 436
- Tab Washers With Long And Short Tab
- DIN 463
- Internal Tab Washers - DIN 462
- Sealing Washers - DIN 470
- Flat Washer With Reduced O.D. - DIN 433
- Shim Washers - DIN 988
- Internal/External Tooth Lock Washers - DIN 6797 A+J
- A+J- Serrated Lock Washers - DIN 6798
- IZ - Serrated Lock Washers (Type JZ) - DIN 6798
- Hi-Collar Lock Washers - DIN 7980
- V - 90degree Countersunk Serrated Lock Washers - DIN 6798
- Conical Spring Washers Belleville Type - DIN 6796
- AZV - Serrated Lock Washers (type AZV) - DIN 6798

English
German
spanish

