Din Spec. : Self Locking Domed Cap Nuts With Nylon Insert - DIN 986

*All measurements in millimeters (mm)
| d1 | e min. | s | m | h |
|---|---|---|---|---|
| M4 | 7.66 | 7 | 2.9 | 9.6 |
| M5 | 8.79 | 8 | 4.4 | 10.5 |
| M6 | 11.05 | 10 | 4.9 | 12 |
| M8 | 14.38 | 13 | 6.44 | 14 |
| M10 | 18.9 | 16 | 8.04 | 18.1 |
| M12 | 21.1 | 18 | 10.37 | 22.5 |
| M16 | 26.75 | 24 | 14.1 | 27.5 |
| M20 | 30 | 16.9 | 35 |
*All information is strictly informative
Bolts Din Specifications
- Round Head Rivets - DIN 660
- Countersunk Head Rivets - DIN 661
- Tee-Head Bolts With Double Nip - DIN 188
- Tee-Head Bolts With Square Head - DIN 186 A
- External Retaining Rings - DIN 471
- Internal Retaining Rings - DIN 472
- Foundation Bolts with Hexagon Nuts-DIN 529 E
- Mu-Carriage Bolts With Hexagon Nuts-DIN 603
- Flat Countersunk Nip Bolt w/Hex Nut-DIN 604
- Hex fitting Bolts w/short Threaded Portion - DIN 610
- Hexagon Socket Screw Plugs - DIN 908
- Hexagon Head Screw Plugs - DIN 910
- Hexagon Socket Pipe Plugs - DIN 906
- Socket Set Screws With Flat Point - DIN 913
- Hexagon Cap Screws Partially Threaded
- DIN 931 - Hexagon Cap Screws With Slot - DIN 933 Sz
- Hexagon Cap Screws Fully Threaded - DIN 933
- Self Locking Domed Cap Nuts With Nylon Insert - DIN 986
- Grooved Pins Full Length Paralled Grooved - DIN 1473
- Grooved Pins Third Length Center Grooved - DIN 1475
- Round Head Grooved Pins - DIN 1476
- Flat Countersunk Head Grooved Pins
- DIN 1477 - Turnbuckles - DIN 1480
- Spring Ppins, Heavy Duty - DIN 1481
- Parallel Pins Hardened - DIN 6325
- Circlips For Shafts - DIN 6799
- Coiled Pins, Medium Duty - DIN 7343
- Taper Pins With Internal Thread - DIN 7978 A
- Dowel Pins With Internal Thread - DIN 7979 D
- Hex Bolts For High Strength Struct. Bolting - DIN 6914
- Hexagon Socket Screw Keys With Pilot
- DIN 6911 - Self-Locking Hex Flange Nuts: Non Metallic Insert - DIN 6926
- Parallel Keys, Round Ended - DIN 6885 A
- Parallel Keys, Square Ended - DIN 6885 B
- Slotted Pan Head Screws, Small Head
- DIN 920 - Slotted Set Screws With Cone Point - DIN 553

English
German
spanish

