|
|
| |
 |
| |
| brass moulding inserts |
| |
|
| |
| Moulding Inserts are installed
during Injection Moulding of any Plastic Box/case/Container,
later which helps in fixing the various types of Screws to close
or cover that plastic Box/Case/Container, in these moulding
inserts. Hence we take utmost care of the Inner Diameter (I/D)
and their various threads like M2, M3, M4, M5 M6, M8, M10, etc
for the perfect tightening of the Screw in it. |
| |
|
| We manufacture various types
of Brass Moulding Inserts like: |
| |
|
 |
Brass Round Inserts |
|
|
Brass Hexagonal Inserts |
|
|
Brass Square Inserts |
| |
|
|
| The special features of Brass
Moulding Inserts are: |
| |
|
|
|
|
Threads as per international
GO & NO-GO Standards. |
|
|
Deep groove for maximum pull
out resistance. |
|
|
Inner diameter (I/D) after
threads with very close tolerance to prevent unnecessary flush
to inter into the inserts. |
|
|
Available Knurling are Diamond
Knurling, Straight Knurling, Unidirectional Knurling or as specified. |
| |
|
|
|
Packing: Available in 50,
100, 200 nos. or gross or as specified |
| |
|
|
|
Size: Shall be manufacture only as per Customer's
specified Drawings and Samples. |
| |
|
|
|
Threading: Various types and sizes of Threading like
B.S.W., B.S.F., B.S.B., B.S.P. & B.S.P.T as per British Standard
Whitworth Form and N.C. & U.N.C., N.F. & U.N.F., N.P.T & N.P.S.,
N.S., N.E.F. etc as per American National Form Threads are
available. All threads shall be as per International GO & NO-Go
Standards. |
| |
|
|
|
Plating/Finish Available: Various types of
Plating/Finish like Natural, Nickel, Silver, Tin or as specified
are available as per specified layer of microns. |
| |
|
|
|
Material: High grade free cutting brass as per IS 319
(Type 1) or BS 249 (Type 1) or any other special Brass material
composition as per customer requirement. |
| |
|
|
|
|
| |
| |
We Manufacturing products of Brass Knurling Small Threaded Inserts, Small Hex Molding Inserts, Brass Square Molding Insert, Brass Inserts, Brass Moulding Inserts, Injection Moulding Inserts, Brass Proto Moulding Inserts, Thermoplastic Moulding Inserts with lot of different sizes, designs, knurling, thread and coating for Plastic Industry. Plastic Moulding Inserts, Cold Moulding Inserts as per international standards and tolerances. Brass Inserts, Brass Moulding Inserts, Brass Plastic Moulding Inserts, Brass Injection Moulding Inserts, Brass Proto Moulding Inserts, Plastic Moulding Inserts, Thermoplastic Moulding Inserts, Injection Moulding Inserts, Cold Moulding Inserts, Moulded Plastic Inserts As per Custom Specification.
|
| |
|
|
| |
|
Home
